Thermoadhesives

Protechnic is the only dry thermoadhesive company in the world that produces
heat fusible roll goods in all three structures, web, film, and net.

Thermoadhesives

BBcon USA

Web
Our webs are of a unique structure so as to be the most homogeneous in the industry. This allows our customers to often use a lower gram weight product to achieve the same level of adhesion. Lower gram weight equals lower cost, lower energy to bond, less stress on face textiles and substrates. Our webs are available in copolyester, copolyamide, urethane ester, urethane ether, polyolefin, polyethylene, polypropylene, EVA, EAA and mixtures of all of the above to achieve the melt point and viscosity that is perfect for your application. We can deliver webs in incredibly low weights directly on your substate if you wish down to 4 grams/ M² up to 80 grams /M². We can ship with or without paper or PE film backing, and have widths up to 1.95 Meters (77”).

BBcon USA

Film
We use a blown extrusion process for our film. Our films are used both as adhesives and as barriers. We can layer the films together to offer perfect match of adhesive on one side to match your substate, and another layer on the opposite side to match your other substrate. We can go several layers so that you can also have a barrier in the middle or on one side. We have films available in copolyester, copolyamide, urethane ester, urethane ether, high density polyethylene, polyolefin, polyethylene, polypropylene, EVA, EAA and mixtures of all of the above to achieve the melt point and viscosity that is perfect for your application. Our films can also be with or without paper or PE backing and have widths up to 2.4 meters (94”). In some cases our customers have ordered barrier films with a web adhesive backing. Our films can also be slit to allow for air to pass through to prevent bubbles in your lamination process.

BBcon USA

Netting
Our net is a unique thermoahesive product that offers the most air flow while still being an adhesive. This is a perfect solution for those applications that need to be bonded yet still have complete air flow, such as an automotive seat with built in cooling fans. Our nets are available in copolyester, copolyamide, EVA and Polyurethane. We have many different net structures to choose from depending on your needs. All of these are shown on the Protechnic web site. Nets are available up to 1.5 meters (59”) with paper, and 1.6 meters (63”) without paper.

BBcon USA


Automotive Products - Nonwoven Products
BBcon USA
171 Wamplers Lake Rd, Brooklyn, MI 49230
Phone (517) 592-2185 - Ext 109
Cell (517) 403-2067
Fax (517) 592-3759
Email: bashworth@bbconusa.com